Summertime Milling Promo 2023

[Black Box Customs]

Milling and Chilling

With the temperatures rising fast this summer, for the next month until August 15th, 2023, Black Box Customs is aiming to drop the mercury with our Cool Down Summer Milling Promo! Our shop is offering a little relief from the heat. Receive 20% off any of our existing programmed slide operations; That covers the majority of Glock models, Sig Sauer P226 and P320s, Smith & Wesson M&P series, CZ P10 and Shadow series pistols, and more. Contact our Sales Team at Sales@blackboxcustoms.com or 403-470-8802 for more details.

Milling Promo Details
20% Off any Pre-Programmed Milling Operation, which includes optic cuts and slide milling packages, contact the Sales Team for details. Customer covers shipping to and from Black Box Customs. This promotion can’t be combined with any other promotion or discount. The promo will be honoured for any customer that has a project post-dated August 15th, 2023 shipping to our shop.


www.BlackBoxCustoms.com

[taeish]

Lol meant to message, but is 34 slide something that's already programmed?

[Standingtall]

How bout an RMR cut on a Shadow SP01?

[Chilly Willy]

BBC had done a fantastic job of milling an optics cut on my M&P 4.25” 9mm custom for a new Vortex CCQ and maintained my trijicon night sights to co-witness. Can’t say enough good things about the experience and the end product. Midnight bronze cera coat looks amazing with the black frame. I’ll be sending in my G48 for the Holosun Carry optic cut shortly

[Black Box Customs]

Lol meant to message, but is 34 slide something that's already programmed?

Yes the 34 has a ton of pre-programmed options. Check out the link below to our milling services, the photos are for the G17 so the G34 will have some visual differences due to the extra length of the slide.

Milling Services

[Black Box Customs]

How bout an RMR cut on a Shadow SP01?

The SP-01 has a very narrow slide width which tapers off quickly, so there isn't enough horizontal space to accommodate the RMR footprint for direct milling, but can mill for the Trijicon RMR Plate system. The current footprints we can mill the SP-01 for are listed below:

Leupold DeltaPoint Pro
Shield RMS / RMSc
Holosun 407K / 507K / EPS / EPS Carry
FTP Alpha 3
Vortex Venom / Viper / Defender CCW
Trijicon 1911 RMR Plate

[Black Box Customs]

BBC had done a fantastic job of milling an optics cut on my M&P 4.25” 9mm custom for a new Vortex CCQ and maintained my trijicon night sights to co-witness. Can’t say enough good things about the experience and the end product. Midnight bronze cera coat looks amazing with the black frame. I’ll be sending in my G48 for the Holosun Carry optic cut shortly

Glad you like your M&P setup. The Defender CCW looks really good on the M&P from an esthetic view point and it's practical as well. We appreciate the feedback!

[chavacano]

Would you guys able to fit my spare shadow 2 slide on my frame?

[Black Box Customs]

Would you guys able to fit my spare shadow 2 slide on my frame?

Yes, we've done quite a few Shadow 2 OR slide fittings to CZ S2 frames. This would be a gunsmithing service not milling so there wouldn't be a discount for this service. As long as you frame isn't a Shadow 2 Orange or TSO we can do the fitting. Just contact the Sales Team at sales@blackboxcustoms.com for details. Thanks.

[Standingtall]

The SP-01 has a very narrow slide width which tapers off quickly, so there isn't enough horizontal space to accommodate the RMR footprint for direct milling, but can mill for the Trijicon RMR Plate system. The current footprints we can mill the SP-01 for are listed below:

Leupold DeltaPoint Pro
Shield RMS / RMSc
Holosun 407K / 507K / EPS / EPS Carry
FTP Alpha 3
Vortex Venom / Viper / Defender CCW
Trijicon 1911 RMR Plate

So no chance of getting a holosun 509t cut on a Shadow SP01 unless I go the trigicon RMR plate then add the RMR adaptor the 509t comes with.... Love the Shadow 1 but optics choices are pretty dismal for them.